SmallRig 4” Suction Cup Camera Mounting Support for Vehicle Shooting 4122B

SmallRig 4” Suction Cup Camera Mounting Support for Vehicle Shooting 4122B

SmallRig 4” Suction Cup Camera Mounting Support for Vehicle Shooting 4122B consists of a suction cup mount, sucker, hand pump and dust cover. The suction cup camera mount, made mostly of robust and wear-resistant NBR, can work at -40°C to 60°C. It is not easily deformed and features great airtightness, suitable for clean, dry, and smooth surfaces. With powerful suction force, it has a maximum horizontal suction of 50 kg and a maximum vertical suction of 35 kg. The aluminum-alloy suction cup camera mount comes with such accessory mounting points as 1/4″-20 threaded holes, 3/8”-16 threaded holes, and ARRI 3/8″-16 locating holes for attaching 3757B, 3873, 3874, 3875, 2906B, 2070B, 2115C, etc. It is manually pumped and locked, with a safety-line indicator to ensure safety and reliability. When not in use, put on the dust cover to prevent dust for a longer service life.

Note:

1. Suitable for clean, dry, and smooth surfaces, not for rough, wet, uneven, dirty, or fragile surfaces.

2. Please always keep the sucker and filter cotton intact and clean.

3. Please apply it carefully to coated surfaces.

4. When the safety-line indicator shows, it means vacuum loss. Pump the plunger until 100% vacuum pressure.

Disclaimer: Please mount it onto recommended surfaces and check at least every four hours.